Flagpole Installation and Repair Services in Castroville, TX

A broken halyard on an external pole usually means the rope rotted in the sun and rubbed through at the pulley. On an internal halyard pole it's often a worn winch cable. Getting the flag down takes a lift or lowering the pole, not a climb. Book a halyard replacement, and have us swap the pulley in the same visit since a worn sheave chews through new rope.

A lean means the base has moved. The concrete footing may have rocked in soft soil, the ground sleeve may have cracked, or rust may have thinned the pole until it bent at grade. A bent or corroded pole can't be straightened safely, but a sound one can be reset in a new footing. Lower the flag and keep people clear until we inspect the base, then decide between a reset and a replacement.

A ground-set pole needs a footing hole that is often several feet deep. The spot has to clear buried power, gas and irrigation lines, plus any roof line or tree limbs the flag will sweep. A taller pole also needs a bigger footing to carry a heavier flag. Have buried utilities marked first, then book us to set the sleeve and pole.

Fresh concrete around a new footing typically needs a few days to set before the pole can take wind load from a full-size flag. Ordering a commercial pole, a specific finial or matching hardware can add more time on top of that. Schedule the installation a couple of weeks before the date so the footing cures and every part arrives.

A flag that wraps tight usually points to a seized revolving truck at the top. It can also mean a halyard rigged without a counterweight, so the flag can't swing with the wind. Left alone, wrapping tears the fly end and wears the fabric out fast. Get the truck and rigging serviced by us rather than buying new flags, since a fresh one wraps the same way.